Home 9 Backflow Prevention Testing & Installation in Melbourne

Backflow Prevention Testing & Installation in Melbourne

Protect Melbourne's water supply and stay compliant. Mamone's Plumbing & Gas installs and annually tests backflow prevention devices for commercial and industrial properties across Melbourne's western suburbs.
What is Backflow Prevention?
Backflow occurs when water flows in the wrong direction through a water supply system from a property back into the mains supply. This can contaminate drinking water with chemicals, bacteria or other pollutants from industrial, commercial or irrigation systems. Backflow prevention devices are mechanical valves that prevent this reverse flow from occurring.

Melbourne Water requires all commercial, industrial and irrigation properties with a potential cross-connection hazard to install approved backflow prevention devices and have them tested annually by a licensed tester. Failure to comply can result in significant penalties and disconnection from the mains supply.

Annual Testing Required
Melbourne Water requires annual testing of all registered backflow prevention devices. We test, report and submit compliance documentation to Melbourne Water on your behalf.
Licensed Testers
All our backflow testing is carried out by licensed plumbers with current backflow prevention device tester endorsements as required by Victorian regulations.
Our Backflow Prevention Services
9

Annual Backflow Device Testing

We test all types of testable backflow prevention devices including reduced pressure zone (RPZ) valves, double check valves and pressure vacuum breakers.

9

Device Installation

Supply and installation of appropriate backflow prevention devices for new or existing commercial, industrial and irrigation connections based on the hazard level assessment.

9

Device Repair & Replacement

Where a device fails testing, we carry out on-site repairs where possible or replace with an approved device to restore compliance before reporting to Melbourne Water.

9

Hazard Assessment

For new or altered commercial connections, we carry out cross-connection hazard assessments and specify the appropriate level of backflow protection required.

9

Recall Management

We maintain records of all devices we test and send annual reminders when your next test is due, ensuring you never miss a compliance deadline.

Understanding Your Backflow Prevention Compliance Obligations
If your commercial, industrial or irrigation property has a potential cross-connection hazard, Melbourne Water requires you to have an approved backflow prevention device installed and tested annually by a licensed tester. Failure to comply can result in significant fines and disconnection from the mains water supply.

Mamone’s Plumbing & Gas manages the entire compliance process on your behalf. We test your devices, carry out any necessary repairs, and submit all required documentation to Melbourne Water. We also maintain a reminder system so you never miss an annual test deadline.

9

We Handle the Paperwork

Our licensed testers submit all compliance reports directly to Melbourne Water after each test, so you have nothing to organise or follow up.

9

Annual Reminder Service

We record your device details and send you a reminder when your next annual test is due, keeping your compliance on track without any extra effort from you.

Frequently Asked Questions About Backflow Prevention

What is a backflow prevention device and why do I need one?

A backflow prevention device is a mechanical valve that stops water from flowing backwards through your water supply system into the mains. Without it, chemicals, bacteria or other pollutants from your property could contaminate Melbourne’s drinking water supply. Melbourne Water requires these devices on all properties with a potential cross-connection hazard.

How often must backflow prevention devices be tested in Victoria?

Melbourne Water requires all registered backflow prevention devices to be tested annually by a licensed plumber with a current backflow prevention device tester endorsement. After testing, a compliance report must be submitted to Melbourne Water.

What happens if my backflow device fails its annual test?

If your device fails its annual test, we carry out repairs on site where possible, or replace the device with an approved alternative. We then retest the device and submit an updated compliance report to Melbourne Water, restoring your compliance as quickly as possible.

Which properties are required to have backflow prevention devices?

Any commercial, industrial or irrigation property that has a potential cross-connection between the mains water supply and a source of contamination is required to have a registered backflow prevention device. This includes hospitality businesses, medical facilities, industrial sites, car washes, laundries and properties with irrigation systems.

Can Mamone's handle all the reporting and paperwork for Melbourne Water?

Yes. We submit all required annual test reports and compliance documentation directly to Melbourne Water on your behalf. This includes test results, device details and any remediation work carried out. We keep you informed and maintain records for your own files as well.
Don’t Risk Non-Compliance
Book Your Backflow Test Today
Melbourne Water compliance is not optional. Call Mamone’s Plumbing & Gas to schedule your annual backflow device test or discuss a managed compliance programme.
1300 626 663
Chat With A Plumber